HobbyKing
HK-500CMT 3D ELECTRIC HELICOPTER KIT (INCL. GF BLADES AND EXTRAS)
| Length | 840mm |
| Height | 310mm |
| Main rotor diameter | 970mm |
| Tail rotor diameter | 200mm |
| Motor pinion gear | 13T |
| Main drive gear | 162T |
| Tail drive gear | 31T |
| Weight(without power system) | 1370g |
| Flying weight | Approx 1700g |
| Servos | See linked items below. |
| Radio Gear | Gyro/Rx |
| ESC | 80A or greater. |
| Battery | 2 x 2200mAh 3S 20C or greater. |
Drive gear ratio: 1:12.46:4.68,
The highest SPEC HK Heli, the CMT is all metal, ...5 Reviews
HobbyKing
SPEKTRUM/JR (TM) INTERFACE CABLE (CAB-SPEK)
| NOTE | make sure your RX has the data port before ordering |
5 Reviews
HobbyKing
HK-450GT CCPM 3D FULL ALLOY HELICOPTER KIT (ALIGN T-REX COMPAT.)
| Length | 660mm |
| Height | 230mm |
| Main Blade Length | 325mm |
| Main Rotor Diameter | 700mm |
| Tail Rotor Diameter | 150mm |
| Motor Pinion Gear | 12T/13T (Not included) |
| Main Drive Gear | 150T |
| Autorotation Tail Drive Gear | 106T |
| Tail Drive Gear | 25T |
| Weight(w/o blade) | 450g |
| Flying Weight | 730~760g |
5 Reviews
HobbyKing
TZ-V2 .90 SIZE NITRO 3D HELICOPTER KIT
| Control System | 120° CCPM |
| Rotor Blade Length | 680-710mm |
| Length | 1360mm |
| Height | 450mm |
| Width | 185mm |
| Gear ratio | 8.27 |
| Pinion gear | 11T |
| Main gear | 91T |
| Main rotor diameter | 1523~1563mm |
| Tail rotor diameter | 265mm |
| Main rotor length | 680~710mm |
| Flying weight | Approx 4600g |
| Radio Gear | Gyro/Rx |
| Rx Battery | (UBEC with 2 Cell Lipoly) |
Type:, .90 size glow powered 3D Pro Helicopter,
The V2 .90 is a Nitro .90 size gas helicopter ...5 Reviews
HobbyKing
FUTABA R6014HS 14-CHANNEL 2.4GHZ FASST RECEIVER
| Receiver Frequency | 2.4GHz bands |
| High Speed Mode | 1-6 channels support high speed digital servos (possible to mix with normal servos) |
| Length | 2.06" (52.3mm) |
| Height | 0.63" (16.0mm) |
| Width | 1.48" (37.5mm) |
| Weight | 0.72oz (20.8g) |
| Current Drain | 700mAh |
| Power Requirement | 4.8 - 6V NiCd battery or regulated output from ESC |
Specifications:, Channels: 14,
Futaba R6014HS 14-Channel 2.4GHz FASST Receiver R6014HS is a new ...5 Reviews
HobbyKing
ASW28 FIBREGLASS ELECTRIC GLIDER 2.53M (99.6IN) ARF
| Wing Loading | 38~49g/dm2 |
: 2530mm (99.6inch), : 1,100 ~ 1400g, : 1170mm (46inch), : 28.5dm2, : HQ 3015, : 4 channel, 4 servos., : Inrunner or outrunner with a maximum diameter of 35mm, : 38~40mm Diameter. (If spinner is to sit off the fuselage by more than 7mm, a 38mm diameter spinner would continue the curve of the fuselage better.),
Beautifully finished, this faithful replica of the famous ASW28 sport ...5 Reviews
HobbyKing
TZ-V2 .50 SIZE NITRO 3D HELICOPTER KIT
| Control System | 120° CCPM |
| Rotor Blade Length | 600mm |
| Length | 1247mm |
| Height | 355mm |
| Width | 231mm |
| Gear ratio | 8.5 |
| Pinion gear | 10T |
| Main gear | 85T |
| Main rotor diameter | 1345~1365mm |
| Tail rotor diameter | 242mm |
| Main rotor length | 600~620mm |
| Flying weight | Approx 3300g |
| Radio Gear | Gyro/Rx |
| Rx Battery | (UBEC with 2 Cell Lipoly) |
Type:, .50 size glow powered 3D Pro Helicopter,
An amazing quality kit, with excellent features and an advance ...5 Reviews
HobbyKing
MAIN ROTOR BLADE ASSEMBLY TOOL (5MM)
| Hole diameter | 5mm |
5 Reviews
HobbyKing
HK-500GT 3D ELECTRIC HELICOPTER KIT (INCL. BLADES AND EXTRAS)
| Length | 840mm |
| Height | 310mm |
| Main rotor diameter | 970mm |
| Tail rotor diameter | 200mm |
| Motor pinion gear | 13T |
| Main drive gear | 162T |
| Tail drive gear | 31T |
| Weight(without power system) | 1370g |
| Flying weight | Approx 1700g |
| Servos | See linked items below. |
| Radio Gear | Gyro/Rx |
| ESC | 80A or greater. |
| Battery | 2 x 2200mAh 3S 20C or greater. |
Specification:, Drive gear ratio:1:12.46:4.68,
The high performance HK-500GT is 3D flight ready. 99% of ...5 Reviews
HobbyKing
HK-250GT ELECTRIC HELICOPTER KIT (ALLOY/CF W/ BLADES)
| Length | 430mm |
| Height | 187mm |
| Main blade length | 205mm |
| Main rotor diameter | 450mm |
| Tail rotor diameter | 108mm |
| Motor pinion gear | 15T |
| Main drive gear | 120T |
| Tail drive gear | 28T |
| Weight(without power system) | 138g |
| Flying weight | Approx 330g |
Specification:, Drive gear ratio:1:8:4.28, Note:, Canopy color may vary,
The HK-250GT is a high performance factory-upgraded heli kit. With ...5 Reviews
HobbyKing
EAGLE TREE VIDEO OSD PRO EXPANDER
| http | //www.eagletreesystems.com/OSD/OSD-pro.htm |
Here are some examples:, GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed,Course, and more),
An exciting and creative way to include data in your ...5 Reviews
HobbyKing
EAGLE TREE VIDEO OSD EXPANDER
| http | //www.eagletreesystems.com/OSD/OSD.htm |
All parameters available with Eagle Tree eLoggers and Data Recorders + optional sensors will be supported for display on the OSD. Here are some examples:, GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed, Course, and more),
An exciting and creative way to include data in your ...5 Reviews
HobbyKing
HK-500GT (TT) 3D TORQUE-TUBE ELECTRIC HELICOPTER KIT (INCL. GF BLADES AND EXTRAS)
| Length | 840mm |
| Height | 310mm |
| Main rotor diameter | 970mm |
| Tail rotor diameter | 200mm |
| Motor pinion gear | 13T |
| Main drive gear | 162T |
| Tail drive gear | 31T |
| Weight(without power system) | 1370g |
| Flying weight | Approx 1700g |
| Servos | See linked items below. |
| Radio Gear | Gyro/Rx |
| ESC | 80A or greater. |
| Battery | 2 x 2200mAh 3S 20C or greater. |
Specification:, Drive gear ratio:1:12.46:4.68,
The high performance HK-500GT(TT) is 3D flight ready. 99% of ...5 Reviews
HobbyKing
HK-600GT 3D ELECTRIC HELICOPTER KIT W/O BLADES
| Length | 1200mm(47.25 in) |
| Main Blade Length | 600mm |
| Main Rotor Diameter | 1350mm(53.15 in) |
| Tail Rotor | 240mm(9.45 in) |
| Motor Drive Gear | 10T(11T optional) |
| Main Drive Gear | 170T |
| Autorotation Tail Drive Gear | 180T |
| Tail Drive Gear | 40T |
| Weight(w/o main blade) | 1340g |
| Servos | See linked items below. |
| Radio Gear | Gyro/Rx |
| ESC | 80A or greater. |
| Battery | 3300mAh or greater |
Specification:, Height:, 388/405mm(15.25 in/16 in), Drive Gear Ratio:, 1:17.0:4.5/1:15.45:4.5, Flying Weight:, Approx 3000g(6.6 lbs,
Finally, big scale heli flight on a small-scale budget. The ...5 Reviews
HobbyKing
HURRICANE 425 BASIC KIT
| Overall length | 900mm (including cabin & canopy) |
| Main rotor diameter | 965mm |
| Main blade length | 425mm |
| Tail rotor diameter | 217mm |
| Flybar paddle | 78*42*6mm |
| Tail blade length | 75mm |
| Overall height | 310 mm |
| Overall width | 80 mm |
| Motor | 1700w/kv1400 external brushless motor (Not Included) |
| ESC | 60A/25V ESC with built-in SBEC (Not Included) |
| Total weight | 1450g (Equipped with Blades and all electronic gears except Battery). |
| Main rotor blades | 425mm FG Blades (Not Included) |
| Flying duration | 5~6 minutes with 11.1v/2200mah Li-Po battery 2 packs in series 22.2v (Not Included) |
| Motor | 1700w/kv1400 external brushless motor . |
| ESC | 60A/25V ESC with built-in SBEC. |
| Charger | Li-Po battery charger |
| Main rotor blades | 425mm FG Blades |
Specifications:, Required:, 6 (or more) channel heli-capable transmitter (with CCPM function), Battery : Li-Po battery 3S1P (11.1v / 20C or more / 2000mah or more)*2 packs in series or 6S1P (22.2v/ 20C or more / 2000mah or more)*1 pack,
The lightweight kit comes with 425mm Blades which provides rock ...5 Reviews